VOLspeed for Yamaha PW-X and PW-SE

VOLspeed for Yamaha PW-X and PW-SE-
SKU: volspeed-v2-yamaha

Availability: In stock

Incl. 16% Tax
Product Description

VOLspeed for Yamaha PW-X and PW-SE

The VOLspeed tuning module has an exceptionally wide range of optimization options. You can use this tuning tool not only to increase the maximum engine support to an individual value (up to max. 99 km/h), but also to reduce the annoying “wall effect”. This means that you can activate a special (dynamic) mode where the motor support does not stop so abruptly anymore when you reach top speed. This allows you to enjoy a much more pleasant driving experience.

All settings can be made conveniently via the E Bike display, a PC or a Smartphone is not required. Even if the tuning is activated, the display still shows the correct speed.

The installation of the VOLspeed module is simple and can be easily done in 15 to 30 minutes with a little technical skill. The module must be connected directly to the engine. No cables need to be modified or damaged. After installation, the module is not visible from the outside.

VOLspeed for Yamaha PW-X & PW-SE – All features at a glance

- The maximum motor support can be set to an individual value from 25 to 99 km/h. With the VOLspeed tuning module the speed limitation is not automatically lifted completely, as with some other tuning tools. This has the advantage that you can increase the engine support only slightly if necessary, e.g. from 25 to 33 km/h. You will then benefit from a much faster driving performance, without the battery consumption rising too much. You can easily set the desired maximum speed using the arrow keys of the E Bike.

- The tuning can be switched on or off at any time using the buttons at the handlebars (after switching on the E Bike the tuning is always off at first).

- Activate the dynamic mode to reduce the annoying “wall effect” - this means that the motor support will not stop so abruptly anymore when the maximum supported speed is reached.

- Set the wheel circumference on the display (during setup).

- The E Bike display will continue to show the correct data (current speed, distance, average and maximum speed).

- Correct calculation of the remaining range, due to the fact that various parameters like battery charge level, current driving style & battery consumption and the selected support level are taken into account, too (even when tuning is activated).

- Even after the VOLspeed tuning module has been removed, the correct total kilometres will be indicated.

- Thanks to a special protective coating, the electronics of the module are protected against splashing water.

VOLspeed for PW-X and PW-SE – Compatibility

- E Bikes with Yamaha PW-X or PW-SE drive systems of all model years (including 2019) equipped with display A (Sideswitch), display C (Multiswitch) or display X.

VOLspeed for Yamaha PW-X & PW-SE – Technical data

- Dimensions of the module: 43mm x 22mm x 11mm

- Cable length: approx. 140mm

- Power consumption: 0,2W

- Supply voltage: 12VDC

- Weight: only 0,025kg

Scope of delivery

- VOLspeed tuning module

- Mounting and operation instructions

Required tools

Yamaha PW-SE: 3 & 6 mm Allen keys, torque ratchet with 6 mm Allen key.

Yamaha PW-X: 3, 5 & 6 mm Allen keys, torque ratchet with Allen key 4 and 6 mm, chainring nut wrench, threadlocker medium or high strength.

Additional Information
Additional Information
Manufacturer VOLspeed
Write Your Own Review

Only registered users can write reviews. Please, log in or register