siMPLEk Stick Pro für Yamaha
Availability: In stock
siMPLEk Stick Pro for Yamaha
The sIMPLEk Stick Pro is a tuning dongle that completely eliminates the 25 km/h (or 45 km/h) speed limitation of E Bikes powered by Yamaha drive systems.
As this is a dongle with USB connection, all tuning-relevant hardware can be removed within a few seconds.
The sIMPLEk Stick Pro is a quality product Made in Germany.
Real speed remains visible
Even when tuning is active, the current speed can still be read on the display, but (from a speed of 10 km/h) via the second digit and the decimal place of the speed display – this means, if the display shows (e.g.) 13.7 km/h, the actual speed is 37 km/h.
Other parameters such as maximum speed and distance are also displayed correctly, but these values are only adjusted after approx. 1 minute after standstill.
The installation of this tuning tool is very easy - in principle you only have to pull a plug and connect the sIMPLEk dongle.
To install the tool, you first have to remove some and loosen some other screws of the stone chip protection until the motor can be swung out of the frame. Then simply pull the plug of the speed sensor and connect the sIMPLEk Pro connection cable between the motor and the speed sensor. After that, you only have to fix the motor in the frame again and insert and tighten all screws again.
At first use, a single calibration must be carried out to ensure that the actual speed remains readable at each wheel circumference.
As soon as the sIMPLEk Pro Stick is connected, the tuning mode is activated.
sIMPLEk Stick Pro tuning dongle for Yamaha - Compatibility
E Bikes with Yamaha engines (PW, PW-SE, PW-X, GIANT SyncDrive).
Please note: This sIMPLEk tuning dongle is the Pro-version and therefore a finished product - so you do not need to assemble the sIMPLEk Stick by yourself.