sIMPLEk Stick ECOplus for Brose

sIMPLEk Stick ECOplus for Brose – Tuning for up to 20% more range!

The sIMPLEk Stick ECOplus is a completely new E Bike tuning tool: The stick does not take away the 25 km/h limitation of the engine support, but instead causes a significant increase of the range (up to 20%). This tuning tool is an optimal solution for all e bikers who like to ride really long tours.
 
How does the sIMPLEk Stick ECOplus work?
 
After installation, the sIMPLEk ECOplus stick causes a phase-wise reduction of the factory integrated speed limitation of the motor support.
 
More precisely: As soon as the built-in ECOplus Stick detects a constantly driven speed, the motor support is gradually switched off. If the speed falls below a certain value or if a certain period of time is being exceeded, the motor support is gradually switched on again. This method leads to a range increase of up to 20 percent, because the driver has to apply a little more muscle power.
 
The 25 km/h speed limit of the motor support remains completely untouched by the sIMPLEk Stick ECOplus.
 
By the way, you can decide where you want to attach the sIMPLEk stick to your E Bike - the most practical way would be to attach it directly to the handlebar.
 
Important note: The sIMPLEk Stick ECOplus is supplied as a kit, which you first have to assemble yourself. However, since only 4 components are involved, namely board, USB plug, USB housing and connection cable, the assembly is really simple. However, we would like to expressly point out that the USB plug must be soldered to the board – this means the use of a soldering iron is necessary. Afterwards the board incl. USB plug only has to be inserted into the USB housing and the stick is completely assembled.
 
sIMPLEk ECOplus Stick for Brose - Installation
 
For installation, the sIMPLEk stick must be connected to the motor and the electric bike´s sensor with an insulation displacement connector. To do this, you must first remove the crank and the engine cover. Unplug the speed sensor. Then you must cut the cable of the speed sensor to be able to connect the individual wires to the insulation displacement terminal. Then insert the cable ends into the insulation displacement and fix the cables by pressing it together (pay attention to the label on the insulation displacement terminal for correct polarity). Lay the USB connection cable to the desired position of the sIMPLEk stick using the cable ties supplied - we recommend positioning directly at the handlebars.
 
The ECOplus mode gets activated as soon as you insert the sIMPLEk stick – now the range of your electric bike is significantly increased.
 
Even if the ECOplus mode is activated, the correct speed remains readable. Up to a speed of 10 km/h the current speed is indicated 1:1. Above a speed of 10 km/h or when the engine support is decoupled, the real speed is displayed via the second digit and (if existing) the decimal place of the E Bike display. A distinction must therefore be made between displays with and without decimal places:
 
Display with decimal place
 
5,6 km/h on the display = 5,6 km/h in reality
10,0 km/h on the display = 10 km/h in reality
10,5 km/h on the display = 5 km/h in reality
13,5 km/h on the display = 35 km/h in reality
 
Display without decimal place
 
5 km/h on the display = 5 km/h in reality
11 km/h on the display = 11-20 km/h in reality
12 km/h on the display = 20-30 km/h in reality
13 km/h on the display = 30-40 km/h in reality
 
Note: In order to display the real current speed for each wheel circumference even in the active ECOplus mode, a one-time calibration must be carried out the first time the ECOplus stick is used.
 
sIMPLEk Stick ECOplus for Brose - Compatibility
 
- E Bikes with Brose drive systems.
 
The sIMPLEk Stick ECOplus is a quality product manufactured in Germany.