sIMPLEk assembly kit for Impulse
Availability: In stock
sIMPLEk for Impulse – assembly kit
This is a tuning tool that completely removes the speed limitation of E Bikes with Impulse drive systems - no matter if the limit is 25 km/h or 45 km/h. This allows you to finally enjoy the full power of your Impulse motor.
Even with the tuning active, the actual speed remains readable in your E Bike display, but via the second digit and the decimal place of the speed display – which means that a speed display of 14.5 km/h would in reality correspond to a speed of 45 km/h, etc. Maximum speed, distance and total kilometres are also displayed correctly; however, these values are only adjusted after about 60 seconds at standstill.
Made in Germany.
- This sIMPLEk tuning tool is delivered as an assembly kit and is not ready for use when delivered. You have to assemble the tool by yourself, whereby some elements have to be soldered together.
- Tip: If you do not want to do this, we recommend the "sIMPLEk PRO for Impulse" variant, which is supplied as a finished product.
The installation of the assembled sIMPLEk tuning tool is quite simple - in principle only a plug has to be pulled out at the E Bike and the sIMPLEk has to be connected in between.
After installation, a one-time calibration is necessary to ensure that the correct speed can be displayed for every wheel size.
You can download a detailed installation and operating manual "HERE" .
After installation, the sIMPLEk tuning tool is not visible from the outside. In the standard configuration the tuning is always deactivated when switching on the E Bike.
To activate the tuning mode, you must switch off the E Bike within 5-10 seconds after switching it on and restart it.
The "sIMPLEk for Impulse – assembly kit" is available in 2 versions, namely a version with insulation displacement connection and a version with plug coupling. The advantage of the version with plug coupling is that the installation of the tuning tool is even easier and no cables have to be damaged at the E Bike.
This sIMPLEk assembly kit is compatible with the following Impulse E Bike drive systems: