VOLspeed for Yamaha PW-X / PW-X2 / PW-SE / PW-ST / PW-TE V2

The VOLspeed module is one of the most interesting tuning tools on the market, as it offers an unusually wide range of optimization options. This VOLspeed module is definitely one of the most comprehensive and recommendable tuning tools for Yamaha E Bikes ever - use this module to get the best out of your E Bike!
SKU: volspeed-v2-yamaha

Availability: In stock

€155.87
Incl. 16% Tax
Product Description
Details

VOLspeed for Yamaha PW-X / PW-X2 / PW-SE / PW-ST / PW-TE V2

The VOLspeed module is one of the most interesting tuning tools on the market, as it offers an unusually wide range of optimization options. You can not only use the VOLspeed to increase the level of maximum motor support to an individual value, you can also activate a special mode in which the annoying "wall effect" (the abrupt stopping of motor support when reaching the speed limit) is significantly reduced. As a result, your E Bike will be much more comfortable to ride. The possibility to reduce the "wall effect" is a real stand-alone feature and clearly distinguishes the VOLspeed from conventional E Bike tuning tools. Another advantage of the VOLspeed module is that even with active tuning the correct speed will still be displayed.

You can carry out all settings conveniently using the control buttons of your E Bike Display. A smartphone or PC is not required.

This VOLspeed module is definitely one of the most comprehensive and recommendable tuning tools for Yamaha E Bikes ever - use this module to get the best out of your E Bike!



Innovations compared to the predecessor model

Compared to the previous models, this new V2 version of the VOLspeed has been improved in some points:

  • The housing of the module has been significantly reduced in size, making it much easier to install (previously 43x22x11 mm, now 37x19x9 mm - a reduction of 40%).
  • The electronics have been completely encapsulated making the tool completely waterproof.
  • The new V2 module also supports S-Pedelecs and E Bikes reduced to 20 km/h.
  • The module is also compatible with the brand new Yamaha 2020 drive systems (PW-X / PW-X2 / PW-SE / PW-ST / PW-TE).




VOLspeed for Yamaha PW-X / PW-X2 / PW-SE / PW-ST / PW-TE V2 – All advantages at a glance:

  • You can not only cancel the speed limit completely, but also raise it individually to a value of your choice (up to 99 km/h). This has the advantage that you can also raise the height of the max. motor support only slightly if necessary, e.g. from 25 to 32 km/h. This enables you to drive much sportier without the battery consumption increasing too much.
  • The tuning can be easily switched on and off using the handlebar buttons (after switching on the E Bike, the tuning is initially always OFF).
  • You have the option of reducing the so-called "wall effect": In the "dynamic mode" the abrupt reduction of the engine support when reaching the preset maximum speed can be considerably reduced. This leads to a much more pleasant driving experience.
  • Correct display of current speed, average and maximum speed as well as distance travelled.
  • Optimized remaining range calculation: When the tuning is active, not only the battery charge level is taken into account, but also additional parameters such as current battery consumption, driving style and selected support level.
  • Correct total kilometres: Even if the tuning module is removed at a later date, the total mileage remains correct.
  • The wheel circumference can be adjusted during setup.



Easy installation

The VOLspeed is a tuning module that must be permanently installed at the drive motor. In principle, the module simply has to be plugged in. It is not necessary to damage or modify any cables. After installation the tuning tool is not visible from the outside. With a little technical skill the installation is done within 15-30 minutes.


Compatibility

This VOLspeed tuning module is compatible with Yamaha PW-X / PW-X2 / PW-SE / PW-ST / PW-TE drive systems from all years of manufacture (also 2020).

Compatible with the following displays: Display A (Side Switch), C (Multi Switch) and display X.



Technical data

Dimensions of the tuning module: 37mm x 19mm x 9mm
Cable length approx. 140mm
Power consumption 0,2W
Supply voltage 12VDC
Weight only 0,025kg



Scope of delivery

-VOLspeed tuning module
-Installation and operating instructions



Tools required

Yamaha PW-SE / PW-ST / PW-TE: 3 & 6 mm Allen wrench, ideally a torque ratchet.
Yamaha PW-X: 3, 5 & 6 mm Allen wrench, ideally a torque ratchet, chain ring wrench.

Additional Information
Additional Information
Manufacturer VOLspeed
Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register