JUM-Ped for BionX
JUM-Ped for BionX - Software Tuning.
Availability: In stock
E Bike Tuning Tool JUM-Ped for BionX Systems
JUM-Ped for BionX - Product Features at a Glance:
- De-restict your BionX electric bicycle.
- Set the maximum speed support (Vmax) of your BionX engine to a self-selected value: 25/35/45/55 or 65 km/h. You can choose an individual value from 1 to 70 km/h, too.
- Select maximum speed of the throttle function (if there is one).
- Specify the exact wheel circumference.
- Count charging cycles.
- Set kilometre readings.
- Choose language.
Suitable for all electric bikes with BionX engine from approx. June 2009 with CanBus systems (all firmware versions, all types of consoles like G1 / G2 / Ride / Ride+).
The JUM-Ped-SE comes with a display and four buttons to control the device. The installation is very easy; you don´t need a PC or special technical skills. You don´t have to remove the motor or the battery, too
Please note: Every JUM-Ped for BionX is limited to 1 Electric Bike with BionX engine. You can order additional licenses if you want to optimize more BionX electric bicycles with your JUM-Ped.
Important: SMART, DIAMANT and GRACE electric bicycles can only be tuned up to (approx.) 40 km/h. These electric bikes need special instruction steps, too.
- The use of tuning tools is not allowed on public roads. You may only use them in closed areas on private property. Please check the legal requirements in your country before you use the JUM-Ped.
- If you use electric bicycle tuning tools your manufacturer´s guarantee will expire.
- Use the device on your own risk. Please drive carefully.
We accept no responsibility for any damage to people or objects caused by the use or the improper installation / deinstallation of the JUM-Ped-SE.