Bafang

Bafang motors

Here you can find recommended tuning tools especially for Bafang Max Drive motors. With these tuning solutions, you can make your Bafang e-bike faster. The Chinese company Bafang is an internationally active, successful manufacturer of complete systems and system components for e-bikes and e-scooters. The modular Bafang systems can be individually assembled by the e-bike manufacturers. These systems are considered relatively inexpensive and easy to install, which is why they are often used in e-bike retrofit kits. The Bafang Max Drive mid-motor drive system, which was first presented at the beginning of 2015, caused a particular stir. The Max Drive system scores with a massive torque of 80 Nm, which of course provides very powerful support - an immense advantage, especially off-road. Compared to the previous Bafang e-bike drives, the design of the Max Drive System looks much more modern and tidy. A real special feature of this drive is the double bottom bracket sensor (one for each crank). This now also enables so-called zero-cadence reactions of the motor on Bafang drives, as known from the successful Bosch Performance Line drives. With the following articles you can finally use the full potential of your Bafang drive:

SHOW FILTER
Badass Box 4 for Bafang
New
-4%
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: Badass Box

Badass Box 4 for Bafang Attention: Only compatible with the sensor shown above! A simple but highly effective tuning solution for e-bikes with Bafang mid-mounted motors. The Badass Box 4 completely removes the 25 km/h speed limit of the drive...

154,00 €149,00 €
154,00 €149,00 €
Eggrider by Mountain Tuning for Bafang Engines
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: EggRider

Mountain Tuning: EggRider (V2) Smart display for Bafang e-bikes With this unique combination of an intelligent e-bike display and a mobile app, you can improve the riding characteristics and performance of your Bafang e-bike drive. In some cases, tuning is...

159,00 €
159,00 €
MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO)
New
PRE ORDER
OUT STOCK

TYPE: AEG, Bafang

VENDOR: MBIQ

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO) A practical tuning tool in the form of a ready-made sensor solution. The MBIQ-S completely removes the 25 km/h speed limit of e-bike drives - which...

149,90 €
149,90 €
MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with JST plug (4pin)
New
PRE ORDER
OUT STOCK

TYPE: AEG, Bafang

VENDOR: MBIQ

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin JST plug This is a practical tuning tool in the form of a ready-made sensor solution. The MBIQ-S removes the 25 km/h speed limit of e-bike drives completely -...

149,90 €
149,90 €
PearTune MSO 4.0 Tuning for Bafang M200, M300, M400 and M420 with CAN Bus
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

PearTune MSO 4.0 Tuning for Bafang M200, M300, M400 and M420 with CAN Bus The PearTune MSO completely removes the 25 km/h speed limit of Bafang e-bikes with CAN Bus (see below for exact compatibility). By removing the speed limit,...

169,00 €
169,00 €
Light Cable for Bafang
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: Speedbox

Light cable for Bafang After connecting a "SpeedBox for Bafang" tuning tool, you can switch the tuning on and off with the light button of your e-bike. Therefore, the SpeedBox and the lights cannot normally be used at the same...

20,00 €
20,00 €
MBIQ-CC 2 Universal for mid-mounted motors
New
PRE ORDER
OUT STOCK

TYPE: AEG, Bafang, Bosch Gen1, Bosch Gen2, Bosch Gen3, Bosch Gen4, Panasonic, Shimano, Brose, Specialized, Yamaha Powerdrive, Yamaha Syncdrive

VENDOR: MBIQ

MBIQ-CC 2 E-Bike Tuning Universal for mid-mounted motors, programmable, externally switchable The MBIQ-CC 2 tuning tool is a microcontroller-based universal solution that is compatible with various e-bike motors with 2- or 3-wire speed sensors and push-in clamping technology. This tool...

109,90 €
109,90 €
MBIQ-P Plug-In solution for AEG / Bafang BBS01 BBS02 motors with Hall sensor (3pin)
New
PRE ORDER
OUT STOCK

TYPE: AEG, Bafang

VENDOR: MBIQ

MBIQ-P Plug-in solution for AEG / Bafang BBS01 BBS02 motors with Hall sensor (3pin) With this practical tuning tool, you can easily remove the 25 km/h speed limit of your e-bike so that you can finally use the full power...

149,90 €
149,90 €
MBIQ-S Ebike Tuning for Bafang M500 M600 M800 (8pin connector)
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: MBIQ

MBIQ-S Ebike Tuning for Bafang M500 M600 M800 (8pin connector) This microcontroller-based tuning tool is a ready-to-use sensor solution for unlocking Bafang e-bikes with mid-mounted motors. To unlock the speed limit, the existing speed sensor must be replaced with the...

149,90 €
149,90 €
PearTune MSO 3.0 Normal for Bafang M200, M410, M500, M510 with CAN Bus
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

PearTune MSO 3.0 Normal for Bafang M200, M410, M500, M510 with CAN Bus A tuning tool that removes the 25 km/h speed limit of e-bikes with Bafang M200, M410, M500 and M510 drives. This means that the annoying speed limit...

209,00 €
209,00 €
PearTune MSO 3.0 Normal for Bafang M500 and M510
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

PearTune MSO 3.0 Normal for Bafang M500 and M510 A tuning tool that removes the 25 km/h speed limit of e-bikes with Bafang M500 and M510 drive systems. This makes the annoying speed limit a thing of the past, and you can...

199,00 €
199,00 €
PearTune MSO 3.0 STILL ON for Bafang M200, M410, M500, M510 with CAN Bus
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

PearTune MSO 3.0 STILL ON for Bafang M200, M410, M500, M510 with CAN Bus Use the full potential of your e-bike! This tuning tool removes the 25 km/h speed limit of e-bikes with Bafang M200, M500, M510 motors. This means...

209,00 €
209,00 €
PearTune MSO 3.0 Still On for Bafang M500 and M510
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

PearTune MSO 3.0 Still On for Bafang M500 and M510 Use the full potential of your e-bike! This tuning tool removes the 25 km/h speed limit of e-bikes with Bafang M500 and M510 motors. This means you can ride much faster...

199,00 €
199,00 €
PearTune MSO 3.0 Tuning for Bafang M200, M300, M400 and M420 with UART
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

PearTune MSO 3.0 Tuning for Bafang M200, M300, M400 and M420 with UART With this tuning tool, the 25 km/h speed limit of your Bafang M200, M300, M400 & M420 e-bike can be completely switched off. So you can finally...

159,00 €
159,00 €
PearTune MSO 4.0 for Bafang M200, M410, M500, M510 with CAN Bus
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

PearTune MSO 4.0 for Bafang M200, M410, M500, M510 with CAN Bus A tuning tool especially for e-bikes with Bafang M200, M410, M500, M510 drive systems with CAN Bus. In contrast to the conventional PearTune modules, the PearTune 4.0 offers...

219,00 €
219,00 €
PearTune MSO 4.0 for Sachs
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

PearTune MSO 4.0 for Sachs The PearTune MSO 4.0 is a tuning tool for Sachs e-bike motors (from model year 2020 onwards). The 25 km/h speed limit is completely removed so that the full potential of the drives can be...

169,00 €
169,00 €
PearTune MSO 4.0 für Sachs
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: PearTune

219,00 €
219,00 €
sIMPLEk Bausatz Bafang
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: sIMPLEk

89,90 €
89,90 €
sIMPLEk kit for Bafang
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: sIMPLEk

sIMPLEk kit for Bafang The tuning module for hobbyists. This sIMPLEk kit is a very inexpensive tuning module, reduced to the absolute essentials, especially for e-bikes with Bafang Max Drive motors. After installation, sIMPLEk completely removes the preset speed limit...

99,90 €
99,90 €
sIMPLEk Pro Bafang
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: sIMPLEk

sIMPLEk Pro for Bafang This is the SIMPLEk tuning module as a practical ready-made product. The sIMPLEk Pro is an inexpensive tuning tool that completely removes the speed limit of e-bikes with Bafang Max Drive motors - enabling you to...

139,00 €
139,00 €
SpeedBox 1.0 for Bafang (3 pin connector) M300 and M400
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: Speedbox

SpeedBox 1.0 for Bafang (3 pin connector) M300 and M400 A recommended tuning solution for e-bikes with Bafang M300 or M400 drive system: The "SpeedBox" module is currently one of the few tuning tools for the popular Bafang MAX Drive...

169,00 €
169,00 €
SpeedBox 1.1 for Bafang 2020 (4 pin connector) M300, M400, M420
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: Speedbox

SpeedBox 1.1 for Bafang 2020 e-bikes With this tuning tool, you can remove the 25 km/h limit and raise the speed limit significantly. This allows the Bafang motor to finally unfold its full potential. The result is a significant increase...

169,00 €
169,00 €
SpeedBox 1.2 for Bafang M300 & M400 (3-pin connector)
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: Speedbox

SpeedBox 1.2 for Bafang M300 & M400 (3-pin connector) In its range of functions, this tuning tool is limited to the absolute essentials: It removes the 25 km/h speed limit of Bafang e-bikes, so that you can ride much faster...

169,00 €
169,00 €
SpeedBox 1.3 for Bafang (4-pin connector): Max Drive M300, M400, M420
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: Speedbox

SpeedBox 1.3 for Bafang (4-pin connector) This tuning tool removes the 25 km/h speed limit of your e-bike allowing you to ride much faster with full motor support. After installation, you can switch on the tuning module at any time...

169,00 €
169,00 €
Pre-loader