RedPed for Yamaha Syncdrive with RideControl EVO or CHARGE Display or PRO

RedPed for Yamaha Syncdrive with RideControl EVO or CHARGE Display or PRO

RedPed for Yamaha Syncdrive with RideControl EVO or CHARGE or PRO display. Compatible with Giant E Bikes with Syncdrive Life motor, too. Correct values in the display.
 
RedPed module for Yamaha Syncdrive with RideControl EVO or CHARGE or PRO display and / or Giant E Bikes with Syncdrive Life motor
 
The RedPed module belongs to the well-known BlackPed product family. The RedPed device has the following core functions:
 
- Set the maximum speed individually from 15 to 75 km/h !
- All km/h values in the E Bike display are displayed correctly !
- Make settings via the smartphone app, you can take the smartphone with you or leave it at home !
- Adjust the wheel size precisely to the millimetre !
- Set an individual key combination for activation / deactivation of the RedPed module.
- Protect the Bluetooth data traffic !
- Optional freezing or dividing function !
- Logbook function with smartphone and module !
- Switch between km/h and mph!
- Many other functions...
 
Instruction: EBT_Anleitung.pdf
 

Important note: Currently the GIANT app can not be used if the RedPed is installed in parallel!

Depending on the respective E Bike motor and your smartphone operating system, there can be different setting options. Here you can see the settings for the Yamaha Syncdrive engine with RideControl EVO or CHARGE display with the RedPed module, coupled with an Android smartphone:
 
Speedometer view “Easy”:
 
1: Name of the module
2: Unique address of the module
3: Maximum speed: Reset by a long tap
4: Time travelled
5: Average speed: Reset by long tap
6: Crank turns per minute
7: Current motor support level
8: Engine power in watts
9: Current torque at the crank in Nm
10: Current speed
11: Battery charge level in percent
12: Current driver performance in watts
13: RedPed calculated range in kilometers
15: Daily distance: Reset by long tap
16: Shows whether the tuning is active
17: Total distance: Adjustable with long tap
18: (Theoretical) maximum final speed when tuning is active, see 6.2
19: Tuning is activated when the E Bike is switched on
20: Tuning is activated until the E Bike is switched off
21: Tuning activation via walk button (0 to 4 times)
22: Tuning activation by light button (0 to 4 times)
23: Tuning activation via menu button (0 to 4 times)
24: Counter that counts how often the Walk button was pressed, turns green when the set number is reached, there are separate counters for 21 to 23.

Speedometer view “Pro”:
 
25: Average crank turns per minute
26: Maximum crank turns per minute
27: Battery percent per km, averaged over the last 10 km
28: Current battery percentage per km
29: Average engine power in watts
30: Maximum motor power in watts
31: Average torque at the crank in Nm
32: Maximum torque at the crank in Nm
33: Average driver performance in watts
34: Maximum driver power in watts
35: Battery cycles: Reset by long tap
36: See 6.1 (see instructions)
37: Wheel circumference in cm or wheel diameter in inches
38,39,40: See 6.4 (see instructions)
41: Module name: Maximum 9 characters long
 
 Scope of delivery:
 
- 1 RedPed module (manufacturer: BlackPed)
- Instruction (download as PDF)
- 1 Smartphone app for Android or iOS, available in the app stores
- No smartphone included
 
Optional accessories:
 
- Finn Smartphone Holder (to attach the smartphone to the handlebar)
- Micro USB charging cable to Micro USB or Micro USB to Lightning (to charge your smartphone at your E Bike)
 
RedPed modules are available for the following electric bike motors:
 
- Bosch Active, Performance, CX or Active Line Plus
- Yamaha PW-X or PW-SE
- Yamaha Syncdrive with Ride Control EVO / CHARGE display or Syncdrive Life