PearTune MSO 3.0 for Shimano
Availability: In stock
PearTune MSO 3.0 for Shimano
This is the most sophisticated version of this popular tuning module to date, now also compatible with the very latest Shimano drives and updates (version 4.7.0 or higher). After installation, the PearTune 3.0 MSO completely removes the 25 km/h speed limit, so that your Shimano engine can finally unfold its full potential. You will see: Without a speed limit, e-biking is twice as much fun!
This tuning module has the immense advantage that it can be installed very easily. Furthermore you can activate or deactivate the tuning at any time by pressing the light button (lights on = tuning off, lights off = tuning on). If your bike does not have a light button (or the light function is not activated), you can order the PearTune MSO 3.0 in the so-called "Still On" version - in this case the tuning is always active as soon as you switch on the bike.
Important note: When the tuning is active, the E Bike display will only show half of the real speed. This means: If your speedometer shows 22 km/h, you are actually riding at a speed of 44 km/h etc.
PearTune MSO 3.0 for Shimano - The advantages at a glance
- The 25 km/h speed limit is completely removed ("MSO" stands for "Max Speed Off").
- Easy installation: The PearTune module simply needs to be connected between the motor and the magnetic speed sensor ("Plug and Play"). After installation, the module configures itself; you don't need to do anything else.
- Power is supplied by the light connection of the E Bike; you do not need a separate battery.
PearTune MSO 3.0 for Shimano – Improvements compared to the previous models:
- This module also works on the very latest Shimano drive systems (year 2020) and the latest software upgrades (version 4.7.0 or higher). All tests were successful and no error codes were generated.
- An innovative processor provides your E Bike with even more power.
- Enhanced software.
- The module is four times smaller than the previous model (PearTune 2.0). The smaller size and the use of original connectors make the installation easier than ever.
- New hardware design.
PearTune MSO 3.0 für Shimano – Compatibility
This PearTune module is compatible with the following Shimano E Bike drive systems:
E8000, E6100, E6010, E6012, E5000, E7000 (2018-2020). No error codes were generated for any of these motors.
The PearTune MSO 3.0 is even compatible with the very latest Shimano software (version 4.8.0).
The PearTune MSO 3.0 for Shimano is available in two versions
- There is the "normal" version, where the tuning can be switched on with the light button (lights on = tuning off, lights off = tuning on).
- Then there is the "Still On" version, where the tuning is always active as soon as you switch on the E Bike. This version is intended for Shimano E Bikes without an activated light function or without a light button. Tip: You can have the light function of your Shimano bike activated by your E Bike dealer using special diagnostic tools (the "Still On" version also works without problems on bikes with an activated light function) or with using a smartphone app.
This tuning tool is manufactured in the Czech Republic.