PearTune 3.0 Specialized SL 1.1 2020 / 2021
Availability: In stock
PearTune MSO 3.0 for Specialized SL 1.1 engines 2020 / 2021
The popular PearTune tuning module is now also available in a version especially for Specialized SL drive systems (model year 2020-2021 / type 1.1). After installation, you can use this tool to completely remove the 25 km/h speed limit of your E-Bike. This enables you to ride much faster with full engine support.
The tuning can be switched on and off at any time using the WALK button or via certain key combinations (see below). For Specialized SL E-Bikes without WALK button, the module is also available in a "Still On" version, where the tuning is always active as soon as you switch on the bike.
Even when the tuning is active, the E-Bike display shows all data correctly (no halved speed etc.).
Advantages at a glance
- 25 km/h speed limit is completely removed.
- Correct data in the E-Bike display, even with active tuning.
- Tuning can be switched on and off at any time using the "WALK-Assist" button (for Specialized SL E-Bikes without WALK button, the module is also available in a "Still On" version, where the tuning is always active).
- Easy installation thanks to "Plug & Play" principle.
- The tool does not need a separate battery.
The installation of the PearTune module is quite simple and can be easily done by technical laymen. First the motor cover must be removed and the display unscrewed. The PearTune tool must be connected to the display and to the speed sensor connection at the motor. The PearTune module is located under the frame display after installation.
You can find an illustrated installation manual "here“.
Note: If you install PearTune on a completely new E-Bike, you must first ride at least 1 kilometer before you switch on the tuning for the first time.
PearTune MSO 3.0 for Specialized SL 1.1 engines 2020-2021 (Turbo Levo SL) – Compatibility
- Specialized SL E-Bike motors 2020-2021/ Type 1.1 / Turbo Levo SL
- Displays: TCU, TCD
- Even compatible with Specialized “Mission Control”
This tuning module is available in two versions:
"Normal" version: With this version you can switch on the tuning at any time by pressing the "WALK Assist" button on your E-Bike - alternatively you can also press the + and - (↑↓) buttons together twice quickly. To confirm that the tuning has been activated, the display briefly shows a speed of 9 km/h. You can also switch off the tuning again in the same way. In this case the display briefly shows a value of 2 km/h for confirmation.
"Still ON" version: With this version, the tuning module switches on automatically as soon as the E-Bike is switched on. When you turn off the E-Bike, the PearTune module also turns off. The "Still On" version is e.g. intended for Specialized SL E-Bikes that do not have a "WALK-Assist" button.