Sale

DoubleDongle for Brose

With the DoubleDongle you have the choice between 2 dongles - one makes your electric bike faster, the other one reduces the maximum motor-supported speed.
SKU: doubledongle-brose

Availability: In stock

Regular Price: €109.90

Special Price: €99.90

Incl. 19% Tax
Product Description
Details

DoubleDongle for Brose and Conti

An innovative tuning tool with a practical double function: You can use the DoubleDongle to make your E Bike faster within seconds - or to reduce its maximum speed!

The DoubleDongle comes with only one cable set, but 2 dongles:

  • The “normal” tuning dongle cancels the 25 km/h speed limitation of your electric bike´s drive system and doubles the maximum engine support up to 50 km/h – in other words, this is a classic tuning tool.
  • The other dongle, also known as the "limiter", reduces the maximum engine support from 25 km/h to 18 km/h.


That means: With the DoubleDongle you have the choice between 2 dongles - one makes your electric bike faster, the other one reduces the maximum motor-supported speed. Thanks to the pluggable design, you can easily switch between the two dongles at any time. By the way, by removing the respective dongle, your Brose E Bike immediately gets back its original driving characteristics (motor support up to 25 km/h).

The operating principle of the DoubleDongle is simple but ingenious:

After the cable set of the DoubleDongle has been installed and the respective dongle has been plugged in, the dongles effect the following: From a speed of 10 km/h, the "tuning" dongle halves the speed transmitted by the speed sensor, so that the maximum engine support is doubled from 25 km/h to 50 km/h. Please note that your E Bike display will only show half of the actual speed if the tuning is activated. The "limiter" dongle, on the other hand, doubles the transmitted speed so that the maximum engine support is limited - in this case, the engine stops at a speed of 18 km/h. The speedometer will now display the double of the real speed. Also, the distance travelled and the range are no longer specified correctly (valid for both dongles).

E Bike tuning to be able to drive faster is nothing new - but why would you need a dongle that doesn't increase the speed, but reduces it? However, there are cases where this can be really useful:

  • For some elderly people or insecure drivers, a speed of 25 km/h can be subjectively already too fast
  • Reducing the maximum engine support is very sensible for small children, especially for safety reasons.
  • During training rides on E-MTBs in difficult terrain.
  • In pedestrian zones or busy city centres.

In order to activate the desired dongle, you just have to plug it in (after installing the wiring) - this is even possible while driving!

The DoubleDongle for Brose is compatible with:

  • Brose (as from 2015) & Continental (2015-2017) mid-mounted engines 

Operating instructions

- Brose

DoubleDongle installation

In principle, the DoubleDongle simply needs to be connected in parallel to the line of the speed sensor. The installation of the cable set is therefore quite simple and can also be done by technical amateurs at home.

Basically there are 2 possibilities to install the DoubleDongle cable set:

  • By means of branch connectors: To do this, all you have to do is pull the plug from the speed sensor of your E Bike and then attach the DoubleDongle cable using the branch connector.
  • By soldering: In this case you have to cut the cable to the speed sensor, then strip, twist and solder the wires (by the way, an accidental reverse polarity can´t damage the motor). Then protect the connection with a shrinking tube.


You don't need a battery for the DoubleDongle, the energy comes from the line of the speed sensor.


Additional Information
Additional Information
Manufacturer DoubleDongle
Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register