EggRider V2 by Mountain Tuning
Availability: In stock
EggRider V2 by Mountain Tuning
Eggrider V2 is a smart display for Bafang and MATE X E-Bikes. In combination with an app, this device allows you to modify the engine parameters, so that you can sometimes also tune the drive systems.
Mountain Tuning: EggRider V2
A smart display for Bafang & MATE X E-Bikes
With this unique combination of an intelligent e-bike display and a mobile app, you can improve the riding characteristics and performance of your Bafang or MATE X e-bike drive systems. The EggRider display shows all important riding data. In addition, very extensive additional parameters can be shown on the smartphone display while on the move. Furthermore, you can retrieve riding statistics and adjust riding profiles.
Programming the e-bike engine´s parameters is done conveniently via Bluetooth using the mobile app; you need neither cables nor a PC for this.
The design of the EggRider display is pleasantly minimalist, which makes everything look very clear. The display is equipped with control buttons with which you can, for example, switch the device on and off or change the riding mode.
EggRider – Simple set up
• First you have to replace your current e-bike display with the EggRider display.
• Download the mobile app.
• Connect the display to the mobile app to set up EggRider. The connection is made via Bluetooth.
• Now you can adjust and optimise the settings of the motor / controller via the smartphone app.
EggRider – Range of functions:
• Two driving profiles at the touch of a button.
• Quick mode switch for fast switching between street and off-road mode.
• Change riding parameters even while on the road.
• Setting support levels using the control buttons on the display.
• Motor programming: adjust and optimise motor & controller settings and internal parameters.
• Tuning: In some cases, it is possible to increase the 25 km/h speed limit so that you can ride much faster with full motor support. It may also be possible to adjust the maximum speed by changing the wheel circumference via the app. However, this is only possible if the respective settings allow it. We therefore cannot guarantee that you can tune your Bafang e-bike with the help of EggRider.
• Data display: The EggRider display shows the most important parameters such as speed, selected assistance level, riding profile (street / off-road), estimated range in km, lights on/off, power, efficiency, distance, battery capacity (in percent and voltage), trip time.
• Light and WALK mode can be switched on and off using the control buttons on the display.
• Extensive data via the mobile app: Very extensive parameters can be displayed using the app. You can even generate statistics about your journeys and display them graphically.
• Intelligent battery display. Possibility to calculate the actual battery capacity.
The most important data is already shown on the EggRider display - so it is not mandatory to start the mobile app for every ride.
EggRider – Additional information
• OLED display with minimalist design and low energy consumption.
• Weight: approx. 75g.
• Connection between display and smartphone via Bluetooth Low Energy.
• Regular updates.
• Dust and waterproof according to IP65.
EggRider – First activation
After downloading the mobile app, a connection between EggRider and the app has to be established. Proceed as follows:
-At startup, an automatic scan will be triggered for nearby (EggRider) devices.
-Tap on the device in the search list to initiate the connection. (Tip: If the scan has finished and you still don´t see the device in the list, restart display and pull down on the page to manually trigger a re-scan).
-As soon as the popup shows, click on “Activate now”.
- Now the following information must be entered:
„Shop name“: Here you have to insert the shop name where you bought the EggRider device – in our case „ebike tuning shop“ (please do not insert „www“ or „.com“).
Order ID: Normally you can find the Order ID number in your invoice or order e-mail.
E-Mail: Insert your e-mail address.
The activation code will be sent to the given e-mail address. If the data is correct, activation will take place immediately.
EggRider V2 - Compatibility
EggRider is compatible with most Bafang mid-mounted motors, provided they are equipped with UART display connectors (no compatibility with CANbus display connectors).
Here is a list of compatible e-bike drive systems:
• Bafang BBS01 250W/350W/500W/750W
• Bafang BBS02 250W/350W/500W/750W
• Bafang BBS03/BBSHD/LUNA 750W/1000W/1500W/2500W/Ludacris
• Bafang Ultra M620
• Bafang M600
• Bafang Max
• Bafang MM G320
• Bafang MM G330 250
• Bafang MM G340
• Bafang M300
• Bafang M400
• MATE X 250
• MATE X 250+
• MATE X 750S
(not compatible with Mate classic bikes)
• Lishui LSW1545-5-2M
• Lishui LSW856-66M
• Lishui LSW856-66-1M
• Bafang RM G060.750.DC 48V 750W SWX02
• Shengyi DGW25 SY25N4820TA 48V 250W
• Shengyi DGW25 SY254820SJ 48V 500W
• JiaBo CZJB JB-104C2 24V-60V 750W
Replaces the following displays:
• Key-Disp KD51C-D
• Bafang DPC-14 / 850C 3.2-inch MATE-customized TFT LCD color display
• Ukriver UKC1 / UK-CT-18 / UKCT-18 3.5-inch MATE-customized TFT LCD color display
EggRider is not compatible with Rocky Mountain Powerplay e-bikes.
Detailed information about compatibility with other e-bike motors (e.g. RadPower) or controllers can be found directly on the manufacturer's website "here" (LINK to https://manual.eggrider.com/compatibility/).
EggRider works with voltages between 20V up to 60V.
EggRider V2 – mobile app
The mobile app can only be used in combination with the EggRider display. Available for iPhone & Android.
„Google Play“: Required Android version: 4.4 or higher.
„App Store“: Compatible with iOS 10.3 or higher.
A little tip: If you use the mobile app, you can use your smartphone as a larger display in addition to the EggRider display. To attach the smartphone to the handlebar, we can recommend the innovative "Fidlock Vacuum" (LINK) phone mount. This is an innovative smartphone mount based on a unique combination of magnetic force and vacuum. Therefore, the holder is not only very stable, it also enables unprecedented ease of use - for example, you can attach or remove the phone extremely quickly, with just one hand. In addition, the attached smartphone can be rotated 360° even while riding.