E-Bike Tuning Store

MBIQ-S Tuning Sensor for Bosch E-Bikes Here we have a simple but efficient tuning tool for e-bikes with Bosch mid-mounted motors. The MBIQ-S is a microcontroller-based sensor solution that completely removes the speed limit of Bosch drives. There are no...

MBIQ-S Tuning Sensor for Shimano Steps E5xxx - E8xxx E-Bikes with SM DUE11 This is a microcontroller-based sensor solution for e-bikes with Shimano Steps mid-mounted motors. This tuning tool completely removes the 25 km/h speed limit so that you can...

MESC IOL LV: Professional tuning module for IO Hawk Legend on handlebars MESC IOL L by Mountain Tuning - Tuning module for IO Hawk Legend and IO Hawk Legend Lite e-scooters for handlebar mounting. With this high-quality tuning tool, the...

Mountain Tuning Controller (MTC) Set 1a: Doc Green EWA 6000 Tuning Tuning power for your e-scooter! With this ingenious tuning set, the maximum speed of "Doc Green EWA 6000" e-scooters can be increased to up to 31 km/h (the Doc...

Mountain Tuning Controller (MTC) SET 2 for ePowerfun e-scooter ePF-1 PRO Tuning for your e-scooter! With this ingenious set, the top speed of your ePF-1 PRO e-scooter can be increased from 20 km/h to up to 31 km/h. This will...

MTT Power from Mountain Tuning for NCM E-Bikes / comes with optional throttle The MTT Power removes the speed limit of NCM bikes with L7 and C7 display (NCM Moscow, NCM Aspen, NCM Milano, NCM Venice and NCM Miami). Important:...

Mountain Tuning Tool (MTT) Use the Mountain Tuning Tool (MTT) to optimise E-MTBs with Rocky Mountain Powerplay drivetrain in many different ways. You can not only massively raise the level of maximum motor support, but even significantly increase the performance...

PearTune MSO 3.0 for Bosch Gen2, Gen3, Gen4 & COBI The latest and so far best version of one of the most popular tuning modules for Bosch e-bikes ever. Compared to the previous models, the PearTune MSO 3.0 has been...

PearTune MSO 3.0 for Specialized 2.0 / 2.0E / 2.1 / 2.2 engines (from model year 2021 onwards) This tuning tool removes the 25 km/h speed limit of e-bikes with Specialized 2.2 motors completely. This allows you to ride much...

PearTune MSO 4.0 for Giant SyncDrive Pro2 If you have had enough of the annoying 25 km/h speed limit on Giant SyncDrive Pro 2 e-bikes, the PearTune MSO 4.0 is a very good solution. This tried and tested tuning tool...

PearTune MSO 4.0 for OLI This tuning tool for OLI motors impresses with a high range of functions. The core function is, of course, the removal of the 25 km/h speed limit of OLI e-bike drives ("MSO" consequently stands for...

PearTune MSO 4.0 for Yamaha with Displays A / C This version of the popular PearTune tuning module offers far more functions than the previous models. The core function is and remains, of course, the removal of the 25 km/h...

PearTune MSO 4.0 Tuning for Bafang M200, M300, M400 and M420 with CAN Bus The PearTune MSO completely removes the 25 km/h speed limit of Bafang e-bikes with CAN Bus (see below for exact compatibility). By removing the speed limit,...

PearTune MSO for Specialized SL 1.1 / 1.2 motors (model year 2020 onwards) The proven PearTune tuning tool in a version especially for Specialized 1.1 & 1.2 SL e-bike motors. With this tool you can completely remove the annoying 25...

sIMPLEk Pro for Bosch The sIMPLEk tuning tool for e-bikes with Bosch drives in the low-priced module version. After installing the sIMPLEk module, the factory-integrated speed limit is completely removed, so that you can finally exploit the full potential of...

sIMPLEk Pro for Bosch - Nano Edition The sIMPLEk Pro tuning module not only removes the 25 km/h speed limit of Bosch e-bikes, you can even set the desired maximum speed individually via the menu. This allows you to optimally...

SpeedBox 1.0 for Bosch Gen4 Smart System 2022 (BES3) Attention: We strongly advise against downloading the new Bosch engine software update 11.13.0, as this can lead to incompatibilities with SpeedBox Tuning. Please note that the warranty for SpeedBox products does...

SpeedBox 1.3 for Shimano EP8 The SpeedBox 1.3 completely removes the 25 km/h speed limit of e-bikes with Shimano EP8 drives, which means that you can ride much faster with full motor support. It is therefore a tuning tool in...

SpeedBox 1.3 for Shimano EP8 “+E-Tube Port” / Di2 (for Shimano EP8 e-bikes WITHOUT a free E-Tube port) Note: This SpeedBox tuning chip is intended for Shimano EP8 e-bikes without a free E-Tube port - these are usually e-bikes with...

SpeedBox 3.0 for Bosch 2020 (Gen2 / Gen3 / Gen4) Tip: If you install the SpeedBox 3.0 in a brand new Bosch e-bike, you must ride the bike for at least 10 km before switching on the SpeedBox for the...

SpeedBox 3.0 for Bosch 2020 (Gen2 / Gen3 / Gen4) with crank puller Tip: If you install the SpeedBox 3.0 in a brand new Bosch e-bike, you must ride the bike for at least 10 km before switching on the...

SpeedBox 3.0 for Giant (without RideControl Go) This third-generation tuning chip not only lifts the 25 km/h speed limit of your Giant e-bike, you can even set the desired maximum speed to an individual value. This can be done conveniently...

SpeedBox 3.0 for OLI This is a third generation tuning chip that completely removes the 25 km/h speed limit of OLI e-bikes. This enables much faster riding with full motor support. At the same time, the e-bike display shows real...

SpeedBox 3.0 for Yamaha PW-SE, PW-X, PW-TE, PW-X2, PW-ST This smart 3rd generation tuning chip not only removes the 25 km/h speed limit of your Yamaha e-bike, you can even set the maximum supported speed yourself. All this with correct...